|
|
Epoxy Floor CoatingsA wide range of colors are
available.
The concrete is cleaned, and then
shot blasted to remove any glaze or
contaminants. This insures
penetration of the primer.
This can be done on old or new concrete. Areas where oil has penetrated
the concrete, are sealed with a
special "oil lock" primer.
If needed, the entire floor can be
coated in this manner.
This is a typical completed auto
dealership service floor, with a tough,
easy to clean surface. Non-skid
additive can be added if desired.
Hangar floors require a
chemical resistant
urethane top coat to resist
strong aviation chemicals.
|
|
